Vedolux 37 – discontinued
- Gasification with help of a suction fan
- Accomodates 20″ logs
- Simple boiler tube / flue pipe cleanout with complimentary brush
Vedolux 37 boilers work through reverse combustion with the help of a suction fan. The suction fan creates the proper draft to combust firewood; therefore, the Vedolux can be installed with a chimney that does not meet height or width requirements for natural ventilation. To control unnecessary heat extraction, the fan stops automatically when the fire dies.
Although the unit is designed to burn primarily wood, it can be adapted for pellets by installing respective adaptors. The combustion chambers pull gases through the ceramic gates into a secondary chamber to create the gasification process.
The combustion chambert is over 21-1/2″ deep and easily accepts wood up to 20″ long.
When properly used and maintained the Vedolux 37 boiler burn cycle outputs average 126 kBtus per hour, peak output 143 kBTU with 86% efficiency.
All flue pipes are cleaned through a door located on the front of the boiler. Rounded flue pipes easily brush out keeping soot and deposits from accumulated in missed corners. Regular maintenance will keep your boiler burning efficiently – saving you time and wood!Storing heat with an accumulator tank
The Vedolux 37 should be installed with an accumulator tank. The accumulator tank stores heat for a long time reducing the frequency of filling the burn chamber. The volume of the accumulator tank(s) should be dimensioned to suit the size of the house and the output of the boiler. We recommend 600 gallons of storage or more with the Vedolux 37.Boiler is shown with optional stand and ash drawer.